We power wash your home so you don't have to.

The cost of power washing a house can vary greatly depending on factors such as the size of the home, the type of surface that needs to be cleaned, access complications with trees or other obstructions, etc. You can get an accurate cost estimate by contacting professionals in your area for a quote.

Additional information could include any tips you have for people looking to hire someone to power wash their house! Some tips could include checking reviews about past customers they’ve worked with in order to make sure they are reputable in what they do and will try their best when working with your home. They may also give advice on things like when is best for them to come out and how long it may take.

Special thanks to Browns Pressure Washing for providing this content!

There are a few different ways to clean the exterior of your house. The first option is to choose from a variety of pressure washers that will shoot the cleaner onto your bricks and stones. Many homeowners use this method for tougher stains, but you need to wear safety goggles and keep skin at a safe distance from the sprayer, since it can be strong.

If you have delicate plants around your home, or if you want dirt instead of stain removal, then consider using a soft wash house solution with water along with some sort of scrubbing brush.

Thanks to Blue Flamingo SoftWash for sharing this information with us!

Concrete power wash is what you need to do. It’ll pull up all that dirt that has sunk into your driveway over the years, not just looses surface debris that can easily be swept or hosed away. The wash will also remove any stubborn stains without cracking your sealer coat by using gentle pressure and moderate heat.

This information was provided by Gordon Exterior Cleaning.

Yes, many people use pressure washing machines to clean their roof. Roof pressure washing will not only remove any dirt or stains, but also help extend the life of the tiles and prevent mold and algae from developing.

At high pressures, water has a much higher surface tension than it does at lower pressures. When using a pressure washer on shingles or tiles it’s important to be careful because if you direct the nozzle perpendicular at someone tile it will score and crack them (the same goes for aluminum gutters).

Thanks to Moore’s Pressure washing for providing this information, you can learn more about them here: https://moorespressurewash.com/

Two excellent ways are soft washing and pressure washing vinyl siding.

The first requires the use of a power washer with an adequate nozzle, preferably on medium stream with high pressure. The pressure has to be enough that it can break down any of the tough dirt that’s present on the surface of the vinyl siding. For this process it is important to have thick gloves because there are certain finishes that are sensitive to this type of chemical treatment. If you want more attention-grabbing results, try warming up or limiting water flow so as not to go deep into the crevices.

Special thanks to Wise Guys Pro-Wash for sharing!

This would depend on the degree of soiling of the brick. Most people pressure wash their houses, but not brick, because it drives water into deeper recesses that are difficult to remove. Plus, if the bricks are already too wet from rain or other weathering then they will just get wet again and may expand under pressure washing. However, pressure washing brick does have its benefits in increased sanitation by blowing off surface dirt and will likely keep moss away since it’s a softer type of plant growth like algae and fungus that like moist areas dark and warm (like near sidewalks). It also helps to clean any graffiti off things easily. This answer was provided by Green and Clean Professionals, you can learn more about them here: https://www.greenandcleanpro.com/.

No, power washing would have much less impact on your home than a rain storm.

A good rain shower can produce more than an inch of water in an hour, while a professional power washer will deliver only 0.5-2 gallons of water per minute. In addition, the high-pressure stream from a power washer can actually help to remove any dirt or debris that might be blocking your drainage system and contributing to flooding.

This information was provided to us from our friends at Elek Plumbing right here in Allentown, PA.

The cost of roof cleaning can vary depending on the size and type of roof, the severity of the dirt and algae build-up, and the equipment and labor required. Generally, though, you can expect to pay between $400 or more for a standard residential roof cleaning.  Obviously there are many determining factors such as size of roof, how dirty the roof is, the pitch, the material of the roof, and what the roof is made of.

If your roof is severely stained or has a lot of moss or algae growth, it may require more specialized equipment or treatment methods, which will increase the cost. You should always consult with a professional roof cleaner before deciding on a specific plan of action, as they will be able to give you an accurate estimate based on your specific situation.

Thanks to Karey at Florida Clean Roof for this great insight!

Soft washing is the better option for roof cleaning.

Soft wash roof cleaning is a gentle, low-pressure washing process that uses a detergent solution to clean your roof. This method is much safer for your roof than pressure washing, which can damage shingles and tiles.

So if you’re looking for a safe and effective way to clean your roof, soft wash roof cleaning is the way to go.

Thanks to HMS Window Cleaning for sharing this answer!

There are three main types of commercial power wash services: cold water, hot water, and steam.

Cold water is the most popular type because it’s the most affordable and versatile. It’s good for removing light dirt, dust, and debris, but it can’t be used on surfaces that are sensitive to water or that may be damaged by high pressure.

Hot water is more expensive than cold water but can be used on a wider range of surfaces. It’s good for removing grease, oils, and tough stains.

Steam is the most expensive type of pressure washing and is only used for special applications like cleaning aircraft engines or industrial equipment.

Special thanks to LBL Soft Wash for this great information!